3535 Briarfield Blvd.
Maumee, OH 43537 USA
Phone: (419)865-9497
US Toll Free: (800)800-7496
Fax: (419)865-9997
E-mail Requests/Questions to R&R

Some files are available for downloading. You must have Adobe Acrobat Reader to view these files. If you do not have Adobe Acrobat Reader, you may download it by clicking on the Adobe Acrobat Reader logo below. There is no charge for this software.

Technical Paper & Article Request Form

Request copies of one or more technical papers presented by R&R. Simply complete the following information and we will fill your request.

Name:
Company Name:
Street Address:
City: State:  Zip:
Country (if other than US):
E-mail Address:
Phone Number:
Check the paper(s) or articles you wish to receive:
 
CERAMIC SHELL TOPICS
 The Effect of Seal Dips on Ceramic Shell Properties & Performance.
   by: Mike Hendricks, presented at 50th ICI Technical Conference 2002
Practical Ceramic Shell Slurry Preparation & Control
  by: Mark Bijvoet, presented at 25th BICTA Conference on Investment Casting 2001
Advancements in Polymer-Enhanced Water-Based Binders & Slurries
  by: Mike Hendricks & Peter Wang, presented at 49th ICI Technical Conference 2001
Energy Efficiency in the Investment Casting Foundry
  by: Tom Jantzen, PE, Pacific Kiln & Insulations Co., Inc., presented at the 49th ICI
  Technical Conference 2001
Ceramic Shell Green Strength - How is it Measured & What Does it Mean?
  by: Mike Hendricks & Peter Wang, presented at 47th ICI Technical Conference 1999
Specialty Binders for the Investment Casting Industry
  by: Mike Hendricks, presented at 1999 JACT Investment Casting Seminar
Hot MOR & Creep Porperties of Common Ceramic Shell Refractories
  by: Mike Hendricks, Peter Wang, Rick Filbrun & David Well, presented at 46th ICI 
  Technical Conference 1998
The Influence of Thermal Transfer Characteristics of Ceramic Shells on
  Alloy Properties.
  by: Mike Hendricks, Don Engelhardt & Steve Sikkenga (Cannon-Muskegon Corp.),
  presented at 43rd ICI Technical Conference 1995
New Developments in Rapid-Dry Water Based Shell Systems
  by: Mike Hendricks, David Well & Don Engelhardt, presented at 23rd EICF Conference
  on Investment Casting 1994
Thermal Conductivity & Heat Flow Measurement for Ceramic Shell Molds
  by: Mike Hendricks & Don Engelhardt, presented at 41st ICI Technical Conference 1993
Improvements in Ceramic Shell Technology Resulting from
  Environmental Pressures
  by: Nevill Swanson, Foundry Trade Journal 1993
Getting More from your Ceramic Shell Slurry
  by: Mike Hendricks, Modern Casting 1990
Slurry Building Techniques & Slurry Control Processes
  by: Marti Rothlisberger, Art Foundry Journal
Shell Material Consumption: How to Determine Actual Weights and Costs
  by Components
  by: Mike Hendricks, Incast 1998
Processing & Firing Influences on Ceramic Shell Materials
  by: Mike Hendricks, Foundry Trade Journal 1991
Rapid Drying Water Based Systems (Water or Alcohol Systems: The
  Choice)
  by: Mike Hendricks, presented at BICTA Seminar 1992
An Analysis of Ceramic Shell Materials
  by: Mike Hendricks, presented at 21st European Conference on Investment Casting
Practical Approach to Slurry Control & Maintenance
  by: David Well, Art Foundry Journal
How to Produce Quality Shells - A Process Review
  by: Rick Filbrun, Art Foundry Journal
 
JEWELRY CASTING TOPICS
Effects of Water Quality & Temperature on Investment Casting Powders
   by: Ralph Carter, presented at Santa Fe Symposium
Effects of Changing the Water-to-Powder Ratio on Jewelry Investments
   by: Ralph Carter, presented at Santa Fe Symposium
 
Papers will be sent by USPS, they are not currently
available in digital format.